With the gradual maturity and strict requirements of the Chinese mining machinery market, the competition model of enterprise development has also changed. From the original price, product quality, and technology competition, it has gradually entered the age of after-sales service competition. Shanghai Clirik has come to the fore. The company attaches great importance to customer service work. In the early stage of contact, the company will figure out the hardness of the processed ore, the fineness of the ore feed, the required fineness of the finished product and the output according to the actual needs of the user, and specify the entire production line process for the user according to the user's investment situation. , To ensure that users can use low investment in exchange for high economic benefits; during the equipment installation and commissioning period, on-site technical personnel will be trained for users, assist users in drawing up construction plans, and on-site training operators. In the later equipment operation process, the company will send full-time technical personnel The personnel assist the customer in production until the customer can run it immediately. The treatment method for the blockage of superfine powder grinding mill.

The superfine powder grinding mill powder production line is a project with complex technology and relatively large investment. Take dolomite powder processing as an example, the dolomite milling production line is sometimes blocked now, which largely affects the smooth and stable operation of dolomite milling. So, what are the reasons? The particle size of dolomite material is too large. In the dolomite milling production line, each type of dolomite superfine powder grinding mill is equipped with a corresponding feeding device port that has corresponding feeding requirements. If the particle size of the dolomite material is too large, it exceeds the requirements of the feeding device Range, jamming of materials will occur, which will affect the smooth progress of the next process of the milling operation; improper operation method. In order to increase the output of the dolomite milling production line, some users feed the equipment too fast and the feed amount is too large. In the case of uneven feeding, it is easy to cause the dolomite superfine powder grinding mill to affect the material. The processing capacity cannot keep up with the feed rate, which causes a large amount of dolomite materials to accumulate in the grinding cavity, which increases the difficulty of the dolomite grinding production line. It is inevitable that clogging will occur after a long time; the blade is severely worn. In the production of dolomite flour, the main function of the shovel is to scoop up the material, and then throw it between the grinding roller and grinding ring through a set angle. In this process, the shovel is a part that directly contacts the material. If the shovel is severely worn, it will not be able to shovel and throw the material better, which will result in a large amount of material that cannot be fully ground, which will form a blockage; The ring is severely worn. When the equipment is under high-load operation for a long time, it is inevitable that the grinding roller and grinding ring will have different degrees of wear. Once the grinding roller and grinding ring are severely worn, the production capacity of the dolomite superfine powder grinding mill will be greatly reduced, resulting in The occurrence of blockage in the dolomite milling production line.